人物雕塑在泥塑階段該怎么養護

在很多地方我們都會看到各式各樣的雕塑作品，關于制作的過程很多人都不知道，不管是制作什么雕塑，首先第一步都是需要先制作泥塑，然后在用硅膠翻模，進行下一步鑄銅，制作過程比較反復，我們今天主要來講一講制作雕塑的第一步“泥塑”，人物雕塑在泥形階段時如何維護？
We can see all kinds of sculptures in many places. Many people don't know about the production process. No matter what kind of sculpture is made, the first step is to make clay sculpture first, and then turn the mold with silica gel to cast copper in the next step. The production process is quite reversed. Today we mainly talk about the first step of making sculpture "clay sculpture", How to maintain the figure sculpture in the mud stage?

雕塑在泥形階段養護時要注意以下這幾個點：1、在上大泥和具體的塑造過程中，為保證泥形塑造順利，保持泥的濕度很重要，通常情況下，每天工作結束后應用塑料薄膜覆蓋；
The following points should be paid attention to during the maintenance of sculpture in the mud shape stage: 1. In the process of large mud and specific shaping, in order to ensure the smooth shaping of mud shape, it is very important to maintain the humidity of mud. Generally, plastic film should be used to cover after the end of each day's work;

2、由于泥形的塑造時間比較長，夏天通常要噴數遍水，甚至安排人專門噴水，也可用面部打濕進行包裹，以增加濕度。
2. As the shaping time of mud shape is relatively long, water is usually sprayed several times in summer, and even someone is arranged to spray water specially. You can also wet your face and wrap it to increase humidity.

4、對于大型浮雕，由于制作時間長，通常需要在泥板背后包一層塑料薄膜，既可防止出現背后風吹造成的泥干現象，又可保持濕度，減緩泥形干裂。
4. For large-scale relief, due to the long production time, it is usually necessary to wrap a layer of plastic film behind the mud plate, which can not only prevent the mud drying caused by the wind behind, but also maintain the humidity and slow down the mud dry crack.

5，在泥形塑造階段,為防止泥風化，對于暫時不做的部分可用塑料布包起來，做哪一部分就打開哪一部分。
5. In the mud shaping stage, in order to prevent mud weathering, the parts that are not done temporarily can be wrapped with plastic cloth, and the parts that are done can be opened.